Cedar Door Matlock Garage Door Timber Cedar Timber Up And Over Doors

The Cedar Matlock door has a distinctive arch design to the top rail of the door. The boards on this door are machined with a Butt-Bead moulding to one side and are 140mm wide and 16mm thick giving the door a more traditional style. All doors are supplied basecoat treated as standard. It is an attractive tongue and grooved boarded door, manufactured in the highest quality Western Red Cedar boards which are glue bonded into a solid cedar frame.

Retractable Door Gear
The top tracks of a retractable gear are shaped in a 'C' profile to prevent the rollers from slipping out. The 'C' shaped tracks run horizontally into the garage and are suspended from the ceiling.

Steel top weatherstrips are included for strength and additional security along with heavy duty lifting arm brackets which support the strong boxed profile lifting arms. Attached to the arms is a multi-spring arrangement with finger safe springs; these are adjustable to counter balance the weight of the door to ensure a smooth and easy operation. Below the lifting arm brackets is the lower rubber weather strips which minimize draughts.

Trackless canopy gear is available on doors up 8ft wide (but not recommend).Retractable operating door gear is our standard option with standard T-handle locking; Euro locking is optional.

Locking System
Locking system on retracting doors includes two steel spring loaded slam latches located at the bottom corners of the door with cables attached to the internal swivel handle. Due to the nature of the top steel weather strips interlocking behind the lifting arm brackets, the door is fixed in four points when closed.

Door Construction
Using traditional jointing and door construction methods together with modern assembly and gluing techniques, Cedar Doors are able to build a door panel which is both strong and durable whilst requiring very little maintenance.

Glazing Options
This door is available with either clear or opaque glazing. Opaque glazing cannot be seen through however lets in some light. Windows are available in the following styles:

The glazing in all our traditional range of doors is of 4mm toughened safety glass in plain or stippled with plain, diamound or square leaded design

Handle Options
Cedar Doors come with a black 'T' handle as standard. Euro locking is available as an optional extra in a choice of five finishes. These can be seen below:

Protection & Finishing
All timber door panels are fully dipped in a tank of Sikkens light oak dip-coat stain which gives a mild seal coating and roughly lasts up to 6 weeks after installation. We recommend that the door is top coated immediately after installation with our optional Sikkens top coat system however you can choose to coat the door yourself.

 Woodgrain finishes.

All doors come with a base coat stain as standard. As an option, we offer the choice of having your garage door fully factory finished in a selection of 9 popular standard colours.

This is applied with a Sikkens 955 power-feed finishing system which gives a hard satin, durable finishing that could last up to 7-10 years before recoating is required.

All Cedar Doors are available fully finished in the following colours:

Matching timber frame option if fitting between is recommended. Contact us for more information on

Finishes.