AlluGuard Roll 77 Electric Button Control
To make an enquiry about this product, please click the button "Make an enquiry" below this message, or call 0800 525 442
- description
- Colours
- Specification
- Video
Using the most popular size of double walled aluminium insulated slats this roller door is a robust design but very simple operation method using only a hold to run internal wall mounted control panel. Press and hold one button for open and one button for closing, that is it.
No remote controls, no infra red beams, no bottom edge safety sensors, just a simple hold to run control, ideal for when you don’t use your garage very much or the garage is entered on foot all the time and is perhaps also integral to the house. Less hassle with electronics and easier to maintain over time.
The AlluGuard ROLL 77 is constructed from high quality 77mm deep double skinned aluminium slats with a foam filled core. It is a made to measure, electric operated roller garage door as standard, made to the exact millimetre in width and height.
The door is electrically operated as standard and incorporates an internal emergency manual release in case of a power failure. This is a winding process using a winding handle provided attaching via a hook to the eye of the motor drive. This can be specified as either on the left or right as viewed from inside the garage.
The curtain of this door rolls around a steel barrel which is supported either side by steel endplates which have a dimension of 300mm x 300mm, which is the headroom required if you wish to hide the roll. Always allow for a maximum 50mm of curtain ‘hang down’ when the door is opened if the opening height is critical to you. This is the same on all roller garage doors.
Hand crank | Lined guide | ZF Lock | Barrel | safety brake |
Door guides either side are either 70mm or 90mm wide and 34mm deep and the door is ordered using the ‘OVERGUIDE’ width from the total width of the curtain and guides combined.
The door can be fitted BEHIND or INBETWEEN the structural opening as required, but always check you have ordered the correct dimensions to take into account the guides and endplates (full hood cover if ordered is the same dimensions)
Ordering size is the Over Guide Width (OGW) x Guide Height (GH).
Doors up to 3000mm wide will have 70mm wide guides either side
Clear opening width = Ordering size less 140mm
Clear opening height = Guide height (Ordering size) less 50mm
Doors over 3000mm wide will have 90mm wide guides either side
Clear opening width = Ordering size less 180mm
Clear opening height = Guide height (Ordering size) less 50mm
(to allow for the bottom slat hang-down into the guide when door is open)
Maximum Width including guides is 5200mm
Maximum Height for guides is 2900mm (Total of 3200mm with the endplates and hood) with a maximum width of 4600mm
Standard Colours:
White (RAL 9016)
Anthracite Grey (RAL 7016)
Black (RAL 9005)
Optional Premium Colours:
Brown RAL 8014
Chartwell green
Navy Blue RAL 5011
Burgundy RAL 3004
Light beige BS 08B17
Fir green RAL 6009
Ivory RAL 1015
Agate Grey RAL 7038
Silver Metallic RAL 9006
Dark brown RAL 8019
Moss Green RAL 6005
Cream White RAL 9001
Graphite
Slate Grey RAL 7015
Duck Egg Blue
Irish Oak - painted finish
Golden Oak - painted finish
Rosewood - painted finish